این ماژول به کمک الکترود درنظر گرفته شده می تواند میزان رطوبت خاک را اندازه گیری کند، با استفاده از این سنسور، یک میکروکنترلر، یک رله و یک پمپ آب ساده می توانید سیستم گلخانه ای خود را بصورت هوشمند کنترل کنید .این ماژول ارزان قیمت برای ساخت گلخانه های هوشمند، سیستم های آبیاری خودکار زمین های کشاورزی و باغ ها، آبیاری هوشمند گلدان های آپارتمانی و… کاربرد دارد.
مشخصات و ویژگی های این ماژول به شرح زیر است:
حساسیت قابل تنظیم از طریق کلید های موجود بر روی برد
ولتاژ عملیاتی 12 ولت
دارای رله خروجی
طراحی فیزکی مناسب برای نصب راحت و آسان
ابعاد کوچک
نمایشگر سگمنت برای نمایش رطوبت و تنظیمات
دانلود دیتاشیت ماژول رطوبت خاک XH-M214
![](https://shop.ideaelec.com/wp-content/uploads/2024/06/soil-moisture-sensor-module.jpg)
Parameters:
Product name:Soil Moisture Controller Module
Model: XH – M214
Power supply voltage: DC 12 V
Output Relay : Output switch
soil moisture range: 20-99%
Control precision: 1%
Control current: 10 A
Net weight: About 28 g
Size: 52 * 43 * 16 mm
Water switch off the value (F0)
Press [SET] (F0) then press [SET] again, (80) this is the settings For the water controller to be in the off state. eg (80) use the + and the – button to increase or decrease the value.
eg When the soil moisture sensor drops below
the value eg. (80) the controller Programme will Activate the next step
Water switch on (F1)
Press [SET] (F0) then [+] (F1) then [SET] (74) this is the settings to swich on the water eg (74) use the + and the – button to increase or decrease the value.
eg When the soil sensor reaches the value of (80) the controller will switch off the relay ( turn off the solenoid valve water switch)
Calibration settings (F2)
Press [set] (F0) then [+] (F1) then [+] (F2) then press [SET] (00)
set (00) use the + and the – button to increase or decrease the value this is used for a sensor offset.
نقد و بررسیها
هنوز بررسیای ثبت نشده است.