سنسور دما، همانند لودسل ها ، ترانسميترها و فلومتر ها از کاربردي تربن ابزار ها در صنعت و اتوماسيون صنعتي بشمار مي رود. اطلاعات اين سنسور ها به کنترلر هاي ابزار دقيق چون plc وارد مي شود و از اين طريق پارامترهاي يک محيط صنعتي کنترل مي شود. معروفترين Sensor تشخيص دما موجود در بازار Lm35 ميباشد ، اين سنسور تغييرات دماي مورد نظر را به ولتاژ آنالوگ تبديل ميکند. اين سنسور داراي سه پايه ميباشد در صورتي که سنسور روربروي ما قرار گيرد (بتوانيم نوشته هايش را ببينيم). اولين پايه ، سمت چپ ( vcc ) ميباشد که به 5 ولت وصل ميشود. پايه وسط ، ولتاژ خروجي ( Vout )است که به ميکروکنترلر متصل ميشود. پايه سوم ، زمين ( GND ) سنسور است. محدوده دمايي که اين سنسور قادر به انداه گيري آن ميباشد بين 55- تا 150+ درجه سانتيگراد است و اين سنسور به ازاي هر درجه سانتيگراد 10 ميلي ولت ولتاژ خروجي را تغيير ميدهد . يعني به ازاي دماي 1 درجه ، ولتاژ خروجي سنسور 10 ميلي ولت و به ازاي 100 درجه خروجي سنسور 1000 ميلي ولت ميباشد. همچنين به ازاي دماي 20- درجه خروجي سنسور 200- ميلي ولت ميباشد . جريان 60 ميکرو آمپر دقت 0.4 +/- 0.8 +/- ولتاژ کاري 4 تا 30 ولت مقياس اندازه گيري .01V/oC کار بر مبناي درجه سلسيوس
- جریان 60 میکرو آمپر
- دقت 0.4 +/- 0.8 +/-
- ولتاژ کاری 4 تا 30 ولت
- مقیاس اندازه گیری .0.1V/oC
- کار بر مبنای درجه سلسیوس
Introduction
The LM35 series are precision integrated-circuit temperature sensors, with an output voltage linearly proportional to the Centigrade temperature. Thus the LM35 has an advantage over linear temperature sensors calibrated in Kelvin, as the user is not required to subtract a large constant voltage from the output to obtain convenient Centigrade scaling. The LM35 does not require any external calibration or trimming to provide typical accuracies of ±¼°C at room temperature and ±¾°C over a full -55°C to +150°C temperature range. The low output impedance, linear output, and precise inherent calibration of the LM35 make interfacing to readout or control circuitry especially easy. The device is used with single power supplies, or with plus and minus supplies. As the LM35 draws only 60 µA from the supply, it has a very low self-heating of less than 0.1°C in still air.
Specification
Calibrated Directly in ° Celsius (Centigrade)
Linear + 10 mV/°C Scale Factor
0.5°C Ensured Accuracy (at +25°C)
Rated for Full −55°C to +150°C Range
Suitable for Remote Applications
Low Cost Due to Wafer-Level Trimming
Operates from 4 to 30 V
Less than 60-μA Current Drain
Low Self-Heating, 0.08°C in Still Air
Nonlinearity Only ±¼°C Typical
Low Impedance Output, 0.1 Ω for 1 mA load
نقد و بررسیها
هنوز بررسیای ثبت نشده است.